94 mm on a ruler is between 90 mm and 95 mm. On a typical ruler containing both mm and inches scales, where the scales are reversed with respect to each other, 94 mm is opposite 8 5/16 inches.
10 mm stands for 10 millimeters!!!!!!!! U PEEPS NEED 2 STUDY
the inner diameter of the pipe Nominal bore (NB) is 40 mm
3/10000000
Not sure about your question but 25.4 is a standard metric to English conversion of mm to inches. 25.4 mm = 1.00 in.
The maximum speed Ethernet of mm fiber has a transmission speed of 100 Mbit/s. The Ethernet mm fiber increases the speed from 10 to 100 megabits per second.
MM ON A RULER MM ON A RULER
A small ruler is normally 150 mm. Many engineers use these.
Use a ruler for mm and cm but a metre stick for m.
To measure the mm of an item you would need to use a metric ruler. The metric ruler has cm and mm on it.
It is 5 mm. A ruler is used for the purpose of determining sizes from 1 mm to approx 300 mm,=.
20 mm should still be 20 mm!
With considerable difficulty! With a 30 cm ruler you can easily ascertain that the length is between 2 and 3 ruler-lengths: 600 mm and 900 mm. Maybe you can judge that the the remainder, after 600 mm is less than half of the 30 cm ruler. So that tells you that it is between 600 mm and 750 mm.
a ruler measures 15 cm .1 cm =10 mm .THis means , 1 standard ruler measures 150 mm.
show me 21 mm on ruler
A metric ruler is use to measure centimeter and millimeters.1 centimeter (cm) = 10 millimeters (mm) .
The millimeters on a ruler are the tiny lines in between each centimeter
1 cm = 10 mm. Start with ruler at 0 and mark ribbon at 30 cm. Then place ruler at the mark and measure 30 cm more and make another mark- you are up to 60 cm or 600 mm. Then place ruler at this mark and measure 5 cm, or 50 mm. Now you have a 650 mm ribbon.