It is hooked to the right side of the fusebox underneath the left side of the steering column. A white plastic open enclosure. You need to use an analog voltmeter to watch the sweeps of the needle to read the codes. I have the LX wagon, and if you are looking at the enclosure with it still hooked to the fusebox, one connection needs to be made to the upper left pin, and the other connection from the voltmeter needs to be hooked to the lower right pin.
If they are hooked up backwards, the needle on the voltmeter will peg itself to the right. If that happens, just switch the connections to where the needle will swing toward the right side of the meter. Slow sweeps are 10's for the code, and fast sweeps of the needle are 1's.
Eagle Summit was created in 1989.
where do you plug in a diagnostic machine on a 1992 eagle summit?
Operation Eagle's Summit happened on 2008-08-27.
The final year of production for the Eagle Summit was 1996. The first Summit hit the road in the United States in 1989.
unscrew the fittings at each end of the line
eagle made it, eagle was later bought out by Chrysler Actually the Eagle Summit wagon was made by Mitsubishi. I was also marketed as the Mitsubishi Expo LRV and the Dodge Vista wagon.
The BPS is built into the airflow sensor on the air filter housing lid.
wat year is it?
On a 1994 Eagle Summit, the fuel pump relay is typically located in the engine compartment's fuse box. This fuse box is usually situated near the battery, on the driver's side of the vehicle. To identify the relay, refer to the diagram on the fuse box cover, which will indicate the specific location of the fuel pump relay.
Yes.
It is in the fuel tank.
you look at the notes and play them