Want this question answered?
my 2000 de ville hides the blend door activator behind the glove box to the left
If you want to be precise and do as little damage as possible, start with a great big drill. The blend door activator is about 5 inches to the right of the center of the dash. Use a 3/4 bit at least 6" long and drill there. Then, using a very sharp saw blade on a sawsall, enlarge the hole to about 6" diameter. When the activator is accessed, carefully unscrew the 4 screws and pull it up and out. Installation is the reverse of removal.
This is fuse number 8 in the fuse box and is a 10Amp Mini Spade type fuse.Very strangely:-This fuse manages the windscreen washers ANDthe rear door lock of the Astra Estate
how do i remove back door card on avauxhall astra 2009
I do not have heat in the car and the blend door clicks. How do I access the blend door in a 2005 Ford Explorer?
How do i replace blend door motor
Where is the blend door actuator located on a 2005 malibu
Your description of the problem sounds a little vague, but it sounds like you are describing a vacuum hose leak someplace behind the dashboard. Probably something to do with the climate control system, like a blend door activator.
To replace a blend door on a 1999 Voyager, you will begin by checking which side of the vehicle is not receiving heat. Then, remove the glove box door by squeezing the inside of the door toward the center of the door to access the blend door.
how do i replacement my blend door in my 1998 ford explorer
How do I locate the heater blend door actuator in a Ford f150 pickup
Probibly your blend door motor is stripped out. Remove motor and check door operation manually