right hand side footwell romove panel behind panel round cover with 4 screws remove them and cover slidepollen filters out
A = Oil/Filter change 1 = Tire rotation 2 = Replace cabin filter
How do you change the cabin air filter of a Saturn 2005 ION 2 ?
Check your drivers manual, it will show you how and when. its behind the glove box should have 2 or 3 clips that you have to lift up on and remove and replace the same way
B. Change engine oil & filter. 2. Change engine air filter & cabin filter. Check all belts. 5. Replace engine coolant.
It doesn't have a cabin filter. My 2006 has the filter housing without a filter in it. Just remove the windshild washer bottle and install the standard filter as normal and it works quite well. You can save money if you're handy with tools buy getting the Bosh P3730 cabin filters and shorten the width to fit -- take off a bit over 1/2 inch and glue back together.
The cabin air filter is located on the passenger side of the cowl. After opening the hood, remove the windshield wipers and the black covering ( 2 small T-30 screws, and a few body grommets). After you remove the cowl there will be a grey accordion looking filter in the cowl, remove that and replace with the new filter.
Behind glove box. To change the cabin air filter you do not need any tools. 1. Pull out glove box pins. 2. Remove the glove box assembly. 3. Remove the filter cover. 4. Take out the in-cabin microfilter from blower unit. 5. Replace with the new one and reinstal on blower unit. 6. Reinstal the glove box.
Take the 2 pins out from under the glove box. Turn glove box 45* degrees. Undo 2 clips and there's the cabin filter.
1=Rotate tires and check air pressure and condition of tires. 2=Replace engine Air filter & Cabin filter, check drive belt.
A= Replace Engine Oil 1= Rotate Tires 2=Replace Air Filter, Cabin Air Filter, Inspect Drive Belt 3=Replace Transmission Fluid On page 313 of the 2008 Honda Accord Owners Manual
undo the 2 stops for opening the glove box, take out the 2 Phillip head screws (not easy) in the cover plate, pull open the cover and slide out the cabin air filter GM cabin filter part number 20958479
This is an easy one. There are three screws under the glove box that will expose the fan and the cabin filter once the cover is removed. The cabin filter is on the left with two white plastic retaining clips approx. 2 inches long, pull the one close to you toward you and the back one away from you. This will allow the filter to drop out. Make sure the cover seats when reinstalling clips.