On the exhaust manifold where the runners meet.
Between the intake and the engine block
Motion control running shoes provide more support and better control. They are helpful for those runners with flat feet, but provide superior control and support for all runners.
Variable geometry or two-stage intake manifolds are used to optimize the torque at all engine speeds by directing the intake air to different length runners. A manifold tuning valve (MTV) is the control mechanism that accomplishes this by directing air at low speed through long runners and air at high speed through short runners. The MTV actuation is through an electric motor / rotary solenoid controlled by the engine controller through a relay. Hope this helps! Jay
It is located in front of the intake manifold between two runners.
Intake valves are larger than exhaust valves, and are aligned with the intake runners on the intake manifold.
To effectively control wisteria runners in your garden, regularly prune and train the plant to a desired shape, remove any unwanted runners promptly, and consider using barriers or root pruning to contain the growth. Regular maintenance and monitoring will help prevent the plant from spreading uncontrollably.
A chamber, located between the throttle body and the runners of an intake manifold, used to distribute the intake charge evenly and to enhance engine breathing.
you need manifold vacuum. Either on one of the intake runners or at the base of the carb.
An intake manifold directs air (air/fuel mixture on carburated engines) to the cylinder head. Depending on the runner length/diameter it can boost torque in a certain rpm range known as "manifold tuning". For example short runners works better for high rpm engines versues a long runner manifold, which is better for low/mid range power.
The thermostat is located at the back of the engine under the exhaust manifold on passenger side. The radiator outlet pipe bolts are accessed from the top of the engine down between no 2 and 3 exhaust manifold runners.
There is one before the catalytic converter where the 4 runners meet on the exhaust manifold. And the second one is after the catalytic converter.