There isn't one. Access to the radiator is via the reservoir.
The radiator cap is on top of the radiator. It is located near the front of the engine compartment towards the right side of the car.
The distributor cap is located on the top of the distributor on a 1996 Sunfire. It is connected to the spark plugs via a wire.
The radiator cap is located on top of the radiator.
It uses the cap on the coolant recovery tank as its "radiator cap".
The thread on cap on your engine coolant reservoir is your pressure cap / radiator cap ( 16 PSI ) on a 1996 Ford Taurus ( all engines )
I looked and looked for one on my '96. I swear it doesn't have one. I believe that all fluid adding must be done via the reservoir.
When the engine is cold, check the level of the coolant in the reservoir. Make sure it's up to the mark on the side. Make sure you get the reservoir cap on tight.
On a 1996 Mercury Sable : The thread on cap on the engine coolant reservoir is the pressure cap / radiator cap
The cooling system on this vehicle does not use a radiator cap on the radiator but on a remote tank. It may have a different (larger) cap on it than what you are used to seeing on the radiator.
On a 1996 Ford Crown Victoria : The thread on cap on your engine coolant reservoir is the 16 PSI pressure cap / radiator cap
It's the thread on cap on the engine coolant reservoir
On top of the reservoir on the passenger side of the motor. It will say Caution do not remove when hot!. There is not one located on top of the radiator itself.