0
If it's a V-6, it's at the bottom of the serpentine belt. There should be a diagram of the belt on a label where the passenger's side shock absorber is, under the hood.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Where is the tension adjustment for a 1990 Buick lesabre serpentine belt?
Serepentine bels do not have tension adjustments, there is a tension pully That is preloaded with a coil spring in it. If the belt is loose, the pully spring may have lost it tension. Replace the pully assembley.
How do you relieve tension on serpentine belt of 97 buick park?
put a wrench on the tensioner pully and pull it to release tension on the belt
Where is the cooling fan sensor located in 1994 Buick roadmaster?
The coolant sensor on a 1994 Buick Roadmaster is located just above the Harmonic Balance pully at about 2 oclock
How do I ID the specific name of the pulleys for the belt on the engine. it is not the tensioner with it's connected pulley. The pully is located in the center at the top and appears smooth?
It is called an Idler pully and is not there to tension the belt.
Can you change the tension on a tensioner pully?
With a self adjusting tensioner pulley, there is no adjustment for tension.
Where exactly is the tension release bolt for the serpentine belt in a 1992 Le Baron?
It probably has a tension release pully, not a bolt. The pully has no function except tension. Your repair manual probably has instructions on changing the belt and a photo of the small pulley. Mary
Where are the bolts needed to tighten the v-belt located on a 98 Plymouth Voyager with 3.0 engine?
if it is a serpentine belt, there is a tension pully that keeps it tight if is a v blet , u generally adjust the tension by moving the alternator
How do you remove alternator Toyota Corolla?
which pully do i remove tension to remove the alternator?
How do you adjust the belt tension for a 98 Accord to replace the alternator?
Apply a wrench to the center bolt on the pully and turn it will adjust the tension.
What is the procedure for replacing the belt tension pully on 97 Bonneville 3.8?
What is the procedure for replacing the belt tenison pully on a 97 Bonneville v6 3.8 engine
How do you lessen the tension on the serpentine belt on a 1998 Grand Cherokee 4.0L six cylinder with air?
This belt is tightened by a manual system. The key is to loosen the bolt located on the tensioner pully, then loosen the adjustment bolt located above and to the left of the pully. For the 4.0L, there is an adjustment bolt behind and on the engine side of the power steering pump. It runs diagonally behind the pump and the tension pulley. In order to loosen the tension, the bolt on the tension pulley must be loosened first. This pulley is the one below the power steering pump. Tighten the pulley bolt again once the adjustment has been made.
How to change Serpentine Belt on a 1989 Chevy s10 blazer?
insert a 1/2" rachet into the tension pully, pull clock wise this will relive the tension on the belt thus allowing you to remove the belt repet to install new belt. make sure the groves of the belt are properly in place before relasing the tension pully back to tension
