Stand on the pasanger side of the car with the hood open, the intake manifold in now in front of you. The intake manifold is in two peices; upper and lower, the idle air control in attached to the lower. Look at the left of the lower intake manifold, between the firewall and the intake, its barely visible but you should see some electrical clips, two of the four bolts holding the IAC on, and the IAC itself.
no different door the 93 will fit small on the 95
Yes, late model bumpers will fit on 89-90 240sx
1243
Craigslist, search for "ka24de"
Yes but the 95 bell housing will need to be reused to the crank angle sensor can be retained
if it's like the s14..it doesn't have a relay..
Nothing. Still the same motor (KA24DE). If you're looking for an S13 I suggest you get a 93 'cause if you plan to do an SR swap the power steering will line up on a 93.
under the car, on the transmission. closest to the motor block.
Yes. Despite the small differences in engines they are interchangeable. Just make sure you use the 95 engine harness.
The 93 model does not use are even have a MAF sensor.
you might check your IAC valve (idle air control valve) check your TPS
NO, to pass smog test, it all needs to be original