Not all Gateway computers have an SD card slot. If your computer has one, it would probably be on the front panel, or, on a laptop, on the front or side.
Yes.
yes, if your PC has both usb port and an sd-reader. you can't do it directly though.
You need a card reader. Some PC's have them built in; otherwise, you can buy an SD card reader that plugs into you USB port for about $10. Alternatively, you can put the card into a digital camera and connect the camera to your PC (requires the cord and software that came with the camera).
I assume you mean CARD instead of port; an SD port and an SD slot are essentially the same thing. The answer is that you don't. You can, of course, get an SD card reader that plugs into a USB port.
You need a memory card reader that can be connected to the USB port in your PC. Or, you can buy an SD to USP key (avaiable in many stores). This way you will be able to see the contents of the SD card in your PC. Some PCs, by the way have readers already installed. If you have a card reader in your PC, look for the slot that says SD, and put your card there.
You need a milti-card reader/writer. They plug in through your USB port.
yep most pc's dont have this a mac does but for a pc get a sd adapter then put the sd in it and the adapter is like a usb.
Gateway
You can either buy a printer, scanner or other external device that has an SD slot in it, buy an SD interface card that occupies a bay in the computer enclosure or you can buy an SD adapter that plugs directly into a USB port.
Ping the default gateway IP address to know if it is reachable
If you are refering to SD Card adapter, there are the following methods. If the adapter uses USB, then attach it to a USB port. (common) If the adapter converts to firewire, plug it into a firewire port. (uncommon) If it adapts mini/micro SD to SD, then slot it into a SD Card Slot.
On mine you put the sd card into a sd card reader and put it in your usb port on your computer and a thing should pop up to install and follow those directions and drag / copy and paste the music to it. hope this helped ;)