There isn't one.
It is built into the headlight switch.
To change the neutral start switch on a 1992 Chrysler LeBaron, first disconnect the negative battery cable to ensure safety. Then, locate the neutral start switch on the transmission, usually on the driver's side. Remove the electrical connector and the mounting bolts securing the switch, then replace it with the new switch, reattach the bolts, and reconnect the electrical connector. Finally, reconnect the battery and test the operation of the switch.
The fuel pump on a 1992 Chrysler LeBaron is inside the fuel tank.
The wiper motor on a 1992 Chrysler LeBaron won't work if the motor has seized up or the fuse has blown. The switch inside the cabin or the wiring can also come loose and cause this problem.
Yes
Ignition switch not releasing pawl in steering lock
It should be located on the drivers side fender well.
The first step on how to change the motor on a 1992 Chrysler LeBaron V6 3.0l is to position the vehicle to where you can get the hoist in and out.
Yes.
It is behind the rear seat.
14 gal