Should be at the upper end of the brake pedal under dash area
Brake light, on your 2000 Chrysler Concorde, by accessing it from the inside of the trunk. Take hold of the brake light, push in and turn. The brake light will come out.
The brake light switch is on a bracket just above the brake pedal.
how to replace the brake light switch at the pedal of a 2001 ford zx2
The brake light switch is located under the dash. It is connected to the upper arm on the Brake pedal
In the top of the trunk near where the brake light is located, there is a small plastic window, remove it and you access the light bulb.
You might have a bad brake light switch. If you don't have brake lights the switch is bad. When your brake light switch isn't working it wont send a signal to the shift solenoid.
Check on the upper end of the brake pedal towards the dash
To replace the brake light switch on a 2000 Nissan Maxima, first, disconnect the negative battery terminal to ensure safety. Locate the brake light switch, which is mounted on the brake pedal assembly. Remove the electrical connector and unscrew the old switch. Install the new switch by screwing it in place and reconnecting the electrical connector before reattaching the battery terminal.
To replace the brake light switch on a 2000 Nissan Altima, first disconnect the negative battery terminal to ensure safety. Then, locate the brake light switch, which is typically found above the brake pedal. Remove the electrical connector from the switch and unscrew it from its mounting bracket. Finally, install the new switch by reversing the removal steps and reconnect the battery.
at the top behind brake pedal, don't remove the lower switch it for the cruise control
The light should be controlled by a switch operated by the emergency brake handle. The switch could be out of adjustment or could be bad.
The brake light switch is bad. It's under the dash, and is switched by the movement of the brake pedal.