The brake light switch is located under the dash. It is connected to the upper arm on the Brake pedal
The brake light switch is on a bracket just above the brake pedal.
how to replace the brake light switch at the pedal of a 2001 ford zx2
You might have a bad brake light switch. If you don't have brake lights the switch is bad. When your brake light switch isn't working it wont send a signal to the shift solenoid.
Check on the upper end of the brake pedal towards the dash
at the top behind brake pedal, don't remove the lower switch it for the cruise control
To replace the brake light switch on a 2000 Nissan Maxima, first, disconnect the negative battery terminal to ensure safety. Locate the brake light switch, which is mounted on the brake pedal assembly. Remove the electrical connector and unscrew the old switch. Install the new switch by screwing it in place and reconnecting the electrical connector before reattaching the battery terminal.
The light should be controlled by a switch operated by the emergency brake handle. The switch could be out of adjustment or could be bad.
The brake light switch is bad. It's under the dash, and is switched by the movement of the brake pedal.
The backup light switch and the brake switch are all in the same relay switch. The backup light switch can be found beneath the drivers side dashboard.
Should be at the upper end of the brake pedal under dash area
Bad fuse or bad brake light switch.
you bought one of those? what a weirdo