The power window fuse is either located in the fuse panel, which is on the side of the dash when you open up the drivers side door, or it is in the fuse box under the hood, which is on the drivers side. It's a black plastic box that says "fuses" on it. I would check inside the car first in the fuse panel. Normally the larger fuses and relays are under the hood. Ones like the horn relay and relays for the ABS. The fuse panel on the side of the dash will have a label on the backside of the plastic cover telling which fuses are what and what terminal/slot there in.
in the fuse box
What fuse controls the brake lights on a 1998 Chevy Camaro? It should be labeled on the fuse block.
are brake lights staying on or is brake in the dash on ?
faulty brake switch
Yes they indeed have brake lights...
The 1984 Chevy Camaro turn signal flasher unit is located beneath the drivers side dashboard. The turn signal flasher unit will be above the brake pedal.
You will need to remove the 1998 Chevy Camaro brake light wiring harness. Remove the brake light retaining screws. Reverse the process to install the new brake light.
brake light switch, it is typically located above the brake pedal somewhere on the brake pedal arm
the emergency brake is on the right side on the console
In the 1993 Chevy Caprice there is a brake sender located inside the steering column where the brake pedal is attached. Perhaps the brake lights are not working because of this, when a person hits the brakes. There could also be a fuse blown or a broken or shorted wire.
If the brake lights do not work on Chevy Venture van 2000, try to disconnect the brake switch. Then short the two contacts of the connector to check if the brake lights are now working.
on the brake pedal under the dash is a brake light switch. that when you depress the brake it turns your lights on. you might wanna check that