answersLogoWhite

0

Look under the vehicle at the junction of the 3 cables

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

How do you tighten a e-break on a 1999 Pontiac Sunfire?

unfortunately you don't.you have to purchase a new cable as these have no adjuster


1991 Pontiac 6000LE won't start?

Does it turn over? Does it have: fuel spark compression?


How do you replace the thermostat located on a 1989 Pontiac 6000LE?

You remove the old one and put a new one


How do you get to the back sparkplugs on a 1988 Pontiac 6000le?

Use a 'universal joint' socket adapter, a short extension, and a 3/8 ratchet


Is it possible to fix a brake cable that has come loose from the barrel adjuster?

Yes, it is possible to fix a brake cable that has come loose from the barrel adjuster by reattaching the cable to the adjuster and adjusting the tension to ensure proper braking function.


Does the engine move forward on a 90 Pontiac 6000LE to install blower fan If so how do you do it?

remove upper motor mout bolts and pry forward.


How do you adjust the clutch on a 1999 Pontiac sunfire 2.2 liter?

To adjust the clutch on a 1999 Pontiac Sunfire with a 2.2-liter engine, first, locate the clutch cable under the dashboard near the clutch pedal. Use a wrench to loosen the lock nut on the cable adjuster, then turn the adjuster to increase or decrease the cable tension until there’s about 1 to 1.5 inches of free play at the pedal. After adjusting, tighten the lock nut and ensure the clutch engages and disengages smoothly. Always test drive the vehicle to confirm proper clutch operation.


How do you change front disc brakes on a 1990 Pontiac 6000LE?

Purchase a repair manual at most parts stores, ( around $12 ) for detailed instructions on this and many other repairs.


How long does it take to replace the hood on a 1984 Pontiac 6000LE?

2 men.. under 1/2 hr.. its time consumming setting it into place and gettin the gaps and shims (if needed) right


How do you change park brake on 1 ton pickup?

Find the cable, leading from under driver foot area to rear wheels, usually in two parts, front to adjuster and adjuster to rear coupler. Remove these by undoing the adjuster, then either lube all cable or fit new ones


How can I tighten the derailleur cable on my bike?

To tighten the derailleur cable on your bike, locate the barrel adjuster on the derailleur or shifter. Turn the adjuster clockwise to tighten the cable. Test the shifting to ensure it is working properly. If needed, fine-tune the adjustment until the shifting is smooth.


How do you tighten the clutch cable on a citroen saxo?

To tighten the clutch cable on a Citroën Saxo, first, locate the cable adjuster, which is typically found near the clutch pedal or on the cable itself. Use a wrench to loosen the lock nut on the adjuster, then turn the adjuster to increase tension on the cable until the desired slack is achieved. Once properly adjusted, tighten the lock nut securely to maintain the adjustment. Finally, test the clutch operation to ensure it's functioning smoothly.