if you are standing at thefront of the car looking back at the starter, it will be right nest to the starter on the passenger side
The crankshaft position sensor on the PT Cruiser is on the side of the engine above the oil filter. The sensor is removed with two screws. Unplug the wiring, remove the bolts, then install the new sensor.
just above the oil filter
In the front under the starter you have to get to it from under the car
The tone wheel for the crankshaft position sensor is different.
on the back side of the motor close to the oil filter
crankshaft position sensor sits in the lower part of the engine somehow on the top of chamber. when you open the chamber which is also called oil pain you will see the crankshaft position sensor.
the crank shaft sensor on 06 pt cruiser is located underneath the starter. It's a very tight spot, to remove you need a 8mm socket and you have to unplug the sensor once is out...Don't foget to disconet the battery.
Yes, along with many other things.
It is on the back of the engine. It is a three wire connector just above the oil pan.
under starter, above the bell housing bracket, on radiator side of engine!!!
Check t he wiring and connections for problems.
Yes, either could.Yes, either could.