answersLogoWhite

0

The Radiator drain is located on the passenger side of the vehicle, behind the grille. Remove the grille by removing the eight [8] screws located in the front of the grille. Pull top of grille forward and lift out and away from vehicle. The Drain Cock is located at lower left of radiator.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you unplug radiator drain cock in jeep Cherokee?

Questioner doesn't give the year of their Jeep - but - the draincock on my 91 Cherokee Laredo is near the right headlight. I had to remove the grill, and it's just a few inches back, nestled between the headlight housing and the edge of the radiator. Mine is tough to get to and when I drain it, coolant gets EVERYWHERE.


Will a transmission from a 91 Jeep Cherokee work in an 89 Jeep Cherokee?

yes


Will a 91 Jeep Cherokee ecu work in a 87 Jeep Cherokee both are 4.0?

no.


What seats will fit a 91 Jeep Cherokee?

seats from any Cherokee 1996 and older will fit


Will a 93 jeep Cherokee transmission fit 91 jeep wrangler both 5 speed?

If the engine is the same then it will work.


Can you use 91 unleaded in a 1996 Jeep Cherokee?

Yes, but 87 octane is all that is needed.


How many amps does the cigarette lighter of a 91 jeep Cherokee have?

Normally 15 amp max


What year parts will match up with a 95 jeep Cherokee?

I think 91 thru 96


How do you disable a 91 Jeep Cherokee Laredo's factory alarm?

pull the 15 amp fuse in the fuse box.


How do you check to see if the oil gauge line is leaking on your 91 jeep Cherokee 6 cylinder?

Trace it or replace it


What the largest tire size you can put on a stock 1992 Jeep Cherokee?

I HAVE A 91 JEEP CHEROKEE LAREDO AND I PUT 31'S UNDER MY STOCK JEEP SO I WOULD GO WITH 31'' TIRES THATS THE LARGEST THAT YOU CAN PUT ON A STOCK CHEROKEE WITH OUT PUTTING A LIFT KIT ON IT AND MINE HAVENT RUBED YET.


Will a 1990 Jeep Cherokee steering column fit in a 1989 Jeep wagoneer both have tilt and cruise?

Yes! They are the same parts..... Just make sure your XJ part is from a 90 not a 91. Jeep changed the 91 and up fitment on the lower column shaft...