Where is the engine block drain plug on a 2001 Jeep Cherokee 4.0 straight 6?

The engine drain plug for 6 cylinder is on the lower left side of engine block.

Open the drain valve on the side of the engine block.

The 2002 Tacoma engine block will have two coolant drain plugs on each side of the block. The coolant drain plugs will be near the front and the rear of the engine block.

I believe it is on the left hand side of the engine block (driver side), below the exhaust manifold.

on the buttom of the block Can you please be more specific? Where exactly on the bottom of the block? Near what on the block?

On the bottom of the engine block. It has a drain plug in it for draining the oil. On the bottom of the engine block. It has a drain plug in it for draining the oil.

The engine block drain plug on a 2004 Hyundai is on the bottom of the block. It is on the back, very accessible behind the starter.

The coolant drain plug on a Nissan Micra engine block is on the upper part of the block. It is under the intake manifold.

there are two on the driver side of the engine block just behind the exhaust manifold below the head and above the oil pan,

Most vehicles have a drain on both.

where is the coolant drain plug on the engine block of Honda ACCORD 2.4 2006

There is no engine block drain plug on a 1996 Chevy Lumina. You drain from the radiator using the plastic plug at the bottom.

The 1994 Lincoln Town Car 4.6 liter engine coolant drain plugs can be found on each side of the engine block. There will be a total of four engine coolant drain plugs.

The engine has a drain plug located on the engine block. Look closely and you will find it.

There should be a drain at the bottom corner of the radiator on the side facing the engine.

There should not be a coolant drain on the engine block. You are probably looking at a freeze plug which should NOT be removed. The freeze plugs where openings for the original production/casting of the engine block and are sealed.

There is no drain plug on the block, the only drain plug your gonna have is on your oil pan for the oil.

Sometimes they use that threaded drain plug location to attach a knock sensor. So if you see a knock sensor threaded into the side of the block that may be where the coolant drain is located.

You drain coolant from the radiator. but according to the book ther are two plugs on the engine block that need to drain the coolant from.

The coolant drain plug is located on bottom corner of radiator facing engine.

There is no drain on the block, just the drain on the radiator (bottom of rad drivers side, facing the transmission). ANS 2 The above is perfectly correct, but if you still wish to drain coolant fluid from that block, the easiest way is removing the lower rad hose from engine side.

The engine block coolant drain plug on 4.3 liter Chevy Blazer is located on the bottom of the engine, near the oil filter. It allows coolant to be completely drained from the block during maintenance.

There is one on each side of the engine block just above were the oil pan bolts to the engine. The plugs are in the center of the block on both sides.

There would be block drains located on each side of the block very close to the engine mounts.

If you are looking to drain the Radiator, the drain plug is on the bottom right (passenger side) of the Radiator. To access the drain you must remove the Rt headlight / turn signal bezel to get to it. There is also a drain in the engine block on the drivers side. It requires removing a pipe plug and it taps directly into a water jacket.