Your engine block is the main part of your engine that holds the crankshaft and pistons internally. Your knock sensors, there are two, are screwed into the top of the engine block in the valley between the cylinder heads. You don't have to remove the engine block, you do have to remove the upper and lower intake manifolds to get to them. I changed the sensors in my 99 rx300, long day!
No they will not.
There are two sensors one in the engine block and one behind the crankshaft pulley
the knock sensors are located in the top of the engine block. The intake has to be removed to get to the sensors.
engine block.. everyone should have a shop manual for their vehicle, and the local library should have a professional shop manual avaialable for FREE to make copies of. Read up and repair like the PRO's...good luck:) Dave Where on the engine block is the #2 knock sensor located? http://www.LexusKnockSensor.com seems like it's a site you should check out. It's soley dedicated to Lexus Knock Sensors.
You replace the engine.
They are located down in the engine block valley. Accessing the knock sensors requires cylinder head removal..........sorry.
Follow the main hose that goes from radiator to engine block. It is on engine block between the main hose connected to engine block and a pullye. The heat gauge wire is snapped on the sensor. Remove the wire and replace the sensor.
most o2 sensors are on the tailpipe between the engine block and the catylitic converter. if you have 2 exahst manifolds, then you should have 2 sensors
yes they both have the same block as the supra the difference between the supra engines and Lexus ones are compression, and on the twinturbo engine, both compression and the turbo setup (intake headers, injectors etc.) it is quite possible to that the engine minus enverything on it and fit into any of these cars and then fit the rest to the block.
On the 2005 model it is located near the top of the engine block on the right hand side of the engine, just above the alternator.
The "knock sensors" for the Avalon 3.0 are facing the firewall on the engine block just below the cylinder head ,their are two knock sensors .
There is two knock sensors on this engine, one is on the engine block closest to the firewall below the spark plugs, the other one is on the opposite side of the engine block closest to the front of the vehicle beside the oil filter.