Never heard of a "front wheel modulator" on a S-10 Blazer. If you mean hub, it is the wheel bearing assembly. If you meant 4x4 shift solenoid then depends if it is shift on the fly or not. The ABS has a modulator, but not sure what you mean.
Located on the inside of the frame on the right side of the truck just in front of the rear wheel.
behind transmission but in front of rearend that is if indeed it's a 4x4 and not a rear wheel drive only
rear wheel drive or 4x4 capable
The front wheel stud on a 1992 Chevy Blazer S10 can be changed by jacking the vehicle up, removing the wheel, and unbolting the caliper. The rotor assembly can then be removed, and the wheel stud pressed or hammered out of its seat.
It is rear wheel drive, until you shift it into 4 wheel drive.
35mm
i have a 2002 Chevy blazer 2 door my horn is located right above the right front wheel, right outside the engine compartment. if you are standing faceing the front of the car, look to your left and down, above where the wheel is and youll see it. or open the hood and set the alram off and follow the sound. hope this helps
To replace the front fenders on a 1993 S10 Blazer, unscrew the bolts holding the old fenders in place. There are also rivets that have to be removed around the wheel well on both sides. The bolts are located inside the hood area on top of the fender.
34 mm
36 mm
The black box on the wheel well, when facing the engine from the front of the vehicle is located on the left side with the words black and white on it. They are vehicle specific so match up the numbers.
you probably need to repalce one of the front wheel bearings(hub assembly). the sensor for the abs is located in the assembly