The grounded conductor is usually covered in white or light gray insulation. The grounded conductor is connected to the grounding conductor at one and only one point, usually near the transformer or in the circuit breaker panel.
The wire connects to the lightning rod located on the highest elevation of the church. If the church takes a hit from lightning, the wire makes for an easy low resistance path to ground with minimal damage to the building structure.
Ground wire can be appropriately bonded to the neutral and cabinet at the service box by connecting the neutral and ground wires from the feeder wires to the neutral bus bar and the ground terminal located on the same cabinet at the service box. White wire (neutral) must be connected to bus bar and bare wire must be connected to ground terminal in the same cabinet.
Ground wire to neutral wire.
the green wire its ground so you have black withe an ground
Connect the ground wire to the exhaust fan housing.
It is located on the battery
Chevrolet Celebrity uses negative ground, there is no positive ground.
looking for help on the brake light ground wire location for 1999 gmc suburban 4x4
Usually on the Negative terminal of the battery.
What ground are you talking about, main ground is located on battery to chasey or to engine. Other wise there are many grounds on this vehicle.
Connect them in parallel. The black wire from the ballast to the black line wire. The white wire from the ballast to the line neutral. Connect the ground wire to the ground screw which is located in the body of the fixture. Grounding of the fixtures is essential.
It means a wire in the ground.
If your talking about the main ground wire from the battery, its located on the metal wall right to the left of the negative terminal. Just follow the wire that comes off the negative terminal back six inches to a foot and you can see where the ground wire splits off and bolts to the metal.
The wire connects to the lightning rod located on the highest elevation of the church. If the church takes a hit from lightning, the wire makes for an easy low resistance path to ground with minimal damage to the building structure.
That Thermostat is LOW voltage. IT does not have a ground wire. There is no need for a ground. it only opperates on 24 volts. there may be a green wire but it does not mean it is a ground
If there is no ground wire connect the ground wire to the neutral wire.
Check the continuity of the ground wire from both the ends. Ensure the ground wire is properly connected to earth / ground terminals