it should be below the radio in the heater box . must remove entire dash
The 1997 Geo Tracker block heater does have a frost plug. The Frost plug will be a few inches below the block heater.
How do you add refridgerant to a 1997 Geo Tracker?
To replace the heater core in a 1991 Geo Tracker, start by disconnecting the battery and draining the coolant from the radiator. Remove the dashboard and any necessary components to access the heater core, including the glove box and center console. Disconnect the coolant hoses and screws securing the heater core in place, then remove the old unit and install the new one. Reassemble everything in reverse order, refill the cooling system, and check for leaks.
The 1997 Geo Tracker uses Beck Arnley 252-1501C Blue 50/50 Premix coolant. The Geo Tracker has a coolant capacity of 5.5 quarts.
How cha~ge oil tra~smisio~ of a geo tracker 95
its in the tank
GEO Tracker
No
the heater core is located under the dash on the pasenger side behind the heater fan
Yes, a hood from a 1996 Geo Tracker will fit a 1997 Geo Tracker. Both models share the same body design and dimensions, making many parts interchangeable, including the hood. However, it's always a good idea to check for any minor differences in mounting points or hardware.
The 1996 Geo Prizm heater core is located behind the kick plate on the passenger side of the passenger compartment. The kick plate will need to be removed in order to view the heater core.
no year? wow top of heater box. on 96 , remove glove box door.