The low side of an AC system begins at the metering device outlet and ends at the compressor inlet.
The low pressure (vacuum) side.
The low side has a bigger fitting then the hide side
Its on the low side (suction side) from the compressor to the accumulator........
where is the low side schrader vale located
It's on the high side.
your freon is measured with gauges hooked up to low side of air condition unit the low side is the cold side high side is the condenser side WATCHOUT high pressure every unit has atag on it and let you know how many ounces to be put in low charge is bad but over charge is also bad
On the suction side, the low side...................
300psi high side and 80psi low side
To distinguish the high side from the low side on an AC unit, look for the larger diameter tubing, which is typically the low side, and the smaller diameter tubing, which is the high side. The low side usually has a lower pressure and is connected to the evaporator coil, while the high side is linked to the condenser and operates at a higher pressure. Additionally, the service ports for the low side are often located on the larger line and are usually marked with blue, while the high side ports are on the smaller line and often marked with red. Always consult the unit's manual for specifics, as designs can vary.
The low side.
The condenser is on the high pressure (discharge) side of the system.
Where is the lowside service port on a 2000 buick century?