You can only restart the trip odometer. There usually is a button on the instrument cluster that brings up the trip odometer or the regular odometer. Once you have the trip odometer showing just hold down that button for a few seconds and it will reset the trip odometer back to zero.
The Trip Odometer is normally reset by pushing and holding the reset button in. The odometer can not be reset.
Where is trip odometer reset button on vauxhall insignia
Put the key into the ignition and press the odometer button. While holding down the odometer button, turn the key to the on position. You will see "-----"on the odometer display. It will count down "-----" "----" "---" "- -" "-". Then you will see zeros on the odometer display "000000". You can now release the odometer button. This will reset the maintenance light on your dash!!!!!!
free video instructions go to www.vehix411.com ................turn the power button on, make sure the odometer is on actual mileage2) turn the power off3) hold in the odometer button (in the center of the dash) while pressing the "power" button twice.4) watch the odometer display for dashes that are flashing, after the dashes are gone, the odometer reads 000000.5) release the odometer button the maint. required light will be off now
You can not reset the odometer. The trip meter can be reset by holding down the button.
Press the RESET button.
Press the map button, if that does not bring it back to life, you need to take it to the shop.
For Maintenance Required warning light on 2008+ Highlander Hybrid: Start from car in OFF mode. Keep foot off brake pedal, press START/STOP botton twice, reset odometer A & B. While in odometer A, press & hold odometer reset button and simultaneously press START/STOP button to turn off. Press & hold odometer reset button and simultaneously press START/STOP button twice. Wait for the indicator bar to complete reset cycle and then release odometer reset button.
with the switch off, press and hold the odometer button. Turn the switch on, and the odometer will be in insp mode. mode. Press the odometer button until the indicator shows --- . Turn the switch off and the lamp should be reset.
With the ignition off, press and hold in the reset button for the trip odometer, then turn the ignition on. Hold the trip odometer reset button until the service reminder indicator starts flashing (about 10 seconds). Release the reset button for the trip odometer within 4 seconds.
odometer button