The oil pan and drain plug on your 1996 Chevy S-10 reside underneath your engine. The drain plug is located in the aft section of your oil pan. Right in front of the flywheel before your transmission.
A 15mm wrench should fit the drain plug to remove it.
The wrench size should be 15mm.
AnswerThe engine oil drain plug is located at the lowest point on the engine oil pan.
Replace the drain plug gasket and don't over tighten it.
To drain the oil on a 1991 Chevy S10 Blazer, located the oil pan drain plug. Use a wrench to remove the plug and the oil will flow into the receptacle you have provided.
its on the left hand side of the radiator but not very easy to get to My apology, it is a 1996 S10 Chevy Blazer instead of a 1999 Chevy Blazer. I need to see a picture or more detail of where the drain plug is located on the left side of the radiator. I have searched and searched and cannot find anything to drain with. Thanks, Linel
0.060 Inch
The drain plug would be at the lowest point under the engine. It will take a 15mm wrench to remove it counterclockwise.
The original engine oil drain plug wrench size would be 15mm.
The oil drain for the engine is located at the lowest point on the bottom of the engine oil pan.
The drain plug is at the bottom passenger side of the radiator. It takes a 1/4 inch extension to fit into the head to turn it.
Bottom right corner on the radaitor. It's there just hard to see.
The engine oil drain plug would be at the lowest point on the bottom of the oil pan. It should take a 15mm wrench to remove it couterclockwise.