i have a 89 Chevy 2500 with a 350 TBI and the o2 sensor is on the driver side exaust header where the 4 pipes run into 1 from there follow the wire to its harness/connection- i don't believe it has the original passenger exaust header so i am unsure if it comes with an o2 sensor on each side?? happy hunting :)
yes it can. also check knock sensor and the wire going to it
blak
Just unhook the wire and screew it out of the exhaust pipe.
I think its the purple wire coming from the Oxygen sensor!
Upstream Oxygen Sensor heater performance. That will be the first oxygen sensor in the exhaust pipe ( closest to the engine ) on the passenger side head. You need to check the wireing connector that hooks to the oxygen sensor for a broken wire are bad connection. If you find no problems, then replace oxygen sensor.
Very simple. Unplug the wire to the sensor, unscrew/remove the sensor, install new sensor and plug it in. You're done. Have fun.
get the right oxygen sensor
The front o2 sensor is just to the left of the battery. It's a little tube with a wire that is plugged in right before the exhaust pipe.
It is screwed into the exhaust pipe close to were the pipe bolts to the engine. It is about 3 to 4 inches long with an electric wire pluged to it.
On the exhaust system before the catalytic converter. It looks similar to a spark plug with a wire out the top.
to change o2 sensor ,you need to buy a o2 sensor socket from a parts store then disconnect neg terminal on battery ,after that disconnect wire connecter on o2 sensor and remome o2 sensor
The oxygen sensor is connected by a wiring harness. The wiring harness contains the signal wire. The signal wire goes to the system computer.