The paint code is located in the trunk on the platform that over the spare tire. That's where you will find it usually three numbers and one alphabet.
The oxygen sensor on the 1999 Oldsmobile Cutlass Sierra is located on the lower exhaust. If you need to replace it, they are available for about $20 online.
You fill the radiator through the overflow tank.
Follow the top radiator hose down to the water outlet on the engine; the stat is in there.
DEX-COOL
The starter relay on a 1999 Oldsmobile Cutlass is typically located in the power distribution box under the hood of the vehicle. This box is usually near the battery and contains various fuses and relays for the vehicle's electrical systems. You may need to consult the owner's manual or a repair guide specific to the Cutlass model to locate the exact position of the starter relay within the power distribution box.
Between the engine and firewall labeled TRANS. Under the Air Filter/ Intake box there is a red cap on the transmission for putting in fluid. There is no dipstick that I know of on a 1999 Cutlass w/ 3100 "J" motor.
The 1999 Oldsmobile Cutlass OBD 2 port is under driver side dash left of steering column
dextron / mercon type 2
Begin by loosening the tensioner pulley on your 1999 Oldsmobile Cutlass. Put your serpentine belt around the pulleys. Tighten the serpentine belt with the tensioner pulley.
It depends on what engine you have. They are all on the front of the engine some are under the timing cover. Get a manual on your car from the parts store.
where is the camshaft position sensor located on a 1999 Oldsmobile intrigue
take the complete headlight assembly loose or out to get to the bulb.