There is no pre heat relay on my Peugeot! You better check with Peugeot.
Change the pre=heat (glow plug) relay.
how to spell pre- heat
The relay switch for the washer motor on a 2001 model Peugeot 406 Estate is located at the controls of the windshield washer. It is near the washer fuse.?æ
The prefix could be re- as in reheat, or pre- as in preheat.
It's inside the ECU box under the hood.
That would be 'pre-heat'.
The heat relay needs to be activated by a vaccum switch. On my van the fix was to replace the vaccum line to the relay which allowed the relay to allow heat to travel to the blower.
I have the same car, so this question is easy. First locate car battery on right hand side of car (as standing with bonnet open at front of the car ). Then just behind it there is a metel bracket with a Glow plug heater relay box attached to this bracket ( slide fit , held in place with one screw). The relay is under neath the main area of the metal bracket ,and attached to two wires - unscrew the nuts, and one connector pin block (either 5 pin or 6 pin deppending on model) unclip. If your 406 is the 5 pin relay you have mk1 series 406 . If the relay is 6 pin , you have a mk2 406. Hope this helps herbie44
I'm having the same problem looking for the relay any idea? also position of fuses on 2000 model
A person should know the location of the fuses and relays in a vehicle. The fuel pump relay is located in the fuse box under the hood.Ê
it is on the right hand conner front