Driver's side floor. With the start switch turned on (not running) and the display showing the oil life reading, press the accelerator to the floor and hold.
To the best of my memory, this resets the reading.
The oil change light in your car is there to remind you to change your oil in a timely manner. if you do not reset your oil change light, it just wont remind you to change your oil. :)
go to your oil percentage then hit and hold reset button
To reset the oil change light on a Ford f150 you start by pressing the button on the dashboard. After you press the button on dashboard, it will start to cycle through liquid level checks, such as fuel level. When it gets to the oil, press and hold the reset button.
press the oil button then press the reset button hold for five seconds it will reset oil life monitor back to 100%
The oil change light on a 2006 BMW 330i is reset by turning the key, pressing the trip button, and then the DC button on the turn indicator. The left scroll button is then used to select the oil light and the DC button held until it clears.
After the oil has been changed, hit your status button. When the oil change comes up hit the reset button.
After changing the engine oil, the system must be reset. With the ignition key to ON (engine not running), push the RESET button located in the driver's side instrument panel fuse block. The CHANGE OIL light will start to flash, press and hold the RESET button again. The reset is complete when you hear the chimes and the CHANGE OIL light goes out.
1.press mode button until oil life or change oil or change oil now is displayed2. Press and hold mode button for 5 seconds until reset for new oil is displayed3. Hold reset for 2 seconds
go to your Status button in the car and scroll to oil change option and hold the reset button down for 3 seconds. That simple!
There is a reset button in the fuse box under the hood on the drivers side. Open fuse box and look for the "reset" button. Turn ignition switch on, hold button in for approx. 10 seconds. If change oil light reset was successful, the oil change light will blink for a few seconds.
AnswerTo reset the change oil soon light turn the key to on (not run) and step on the gas to the floor 3 times fast.ACCORDING TO THE 2003 OWNERS MANUAL1. With Key on, (a short time after turning off the engine), press reset button located on drivers side instrument panel fuse block . Button is located at top.2. When the change oil light starts to flash, press and hold the reset button again3. The reset is complete when you hear the chimes and the CHANGE OIL light goes out
because you need to reset your oil light just go on your status and went you get to change oil just push the reset button and that's it