0
You need to lie on the floor in front of the sink and look at the bottom of the disposal canister to see it. Or, use your palm to feel it. Your disposal should also have a small wrench that came with it.
First, make sure the power switch on the wall is OFF and that no one is near the disposal. Second, press the reset button. Get up, turn the water on and see if the disposal works. If not, turn the switch OFF again. Read the manual to find the section about using the wrench. It should say to turn it in a clockwise direction---if unsure, call the manufacturer or a Plumbing store to double-check. After turning the wrench, get back up and re-try the disposal with the water running.
NEVER insert anything into a disposal except food scraps.
NEVER put a wooden spoon, long tool, or your hand/arm into the disposal to free the blades!
Once you get it going with the reset button and wrench tool, you can dump in a half cup of ice, along with 1/4 cup of Baking Soda, followed by more ice. Turn on the disposal and let it grind the ice while running warm water through the disposal.
Other people use small cut lemon slices to freshen the disposal.
Wiki User
∙ 8y ago
Wiki User
∙ 8y agoUsually on bottom center of disposer. Red button.
Add your answer:
Earn +20 pts
How do you repair a pro 333 garbage disposal?
My Pro 333 insink garbage disposal need to be reset but I cannot find the reset button. Can you help
Does garbage disposals have a breaker?
Yes but the breaker would be at your electrical panel, they do not have a breaker connected to the garbage disposal but they do have a reset button on the bottom of the garbage disposal. Most modern homes also have a GFI outlet linked to the garbage disposal. If your disposal is tripping breakers or GFI outlets I would consider that something is very wrong with your disposal, or you installed one with to much power!
How do I unfreeze a garbage disposal?
Reset button or unjamming tool, tool fits in the bottom of disposal in the middle.Ans 2- the usual "unjamming tool " is simply a 3/16 or 1/4 hex wrench.
Do it Yourself Garbage Disposal Repair?
One of the most common problems encountered with a garbage disposal occurs when you try to turn the disposal on, but nothing happens. If you are experiencing this issue, there are several things you can try to fix the garbage disposal yourself before you go through the trouble of calling a professional repairman or replacing the disposal completely. Before you try anything, however, always remember that you should never put your hand down the drain and into the disposal as this is extremely dangerous. If your garbage disposal makes absolutely no noise when it is turned on, this signals that the problem is electrical in nature. The first thing you should do is verify that the garbage disposal is connected to the power source. Obviously, if the disposal isn't plugged in, it will not run. If you find that the disposal is properly connected to power, try pressing the Reset button typically located on the bottom of the disposal unit. In the event that pressing Reset doesn't work, the next thing you can do is check the circuit breaker to see if it has been turned off or tripped. If it has been tripped, simply turn it back on. If you have checked the power, reset the unit, and checked the circuit breaker and your disposal still refuses to make a sound, there is either something wrong with the switch or the disposal may need to be replaced. To check the switch, you must first locate it. It may be on the wall near the disposal or under the sink. Once you have located the switch, you can replace it to see if that solves the problem. Before you replace the switch, however, you must disable the circuit breaker that powers the garbage disposal. After you have replaced the switch, you should turn the circuit breaker back on and check to see if your garbage disposal is working. If the switch was faulty, the garbage disposal should run normally. In the event that none of the suggestions detailed above are successful, it is likely that your garbage disposal cannot be repaired and you will need to replace it. You can either do this yourself or call a professional to install the new disposal.
Where is the reset button on the security system in a Honda Accord 2000?
There is no reset button.
How do you fix the garbage disposal when the water does not drain?
If it is a double sink, does the other side drain? Are you trying to fix the disposal because it does not come on or because it comes on but does not drain. If it comes on but does not drain and the other side does, it is probably just clogged with food. They make drain cleaners for disposals. If neither side drains, put the stopper in the disposal side, hold down on it and plunge the other side.
How do you reset your Wii system?
There is a reset button on the front.
How To Unblock A Clogged Garbage Disposal ?
Instead of calling the plumber the next time your garbage disposal clogs, try to fix the problem yourself. First, unplug the garbage disposal. Then, use a broom handle to manually rotate the blades. The broom handle gives you enough leverage to turn the blades even if there is a clog. Once the blades turn freely, remove the material that caused the clog. Only use your hand if you are sure that the power is completely disconnected. Once the clog is removed, plug the disposal back in, press the reset button, and turn it on. The unit should now work properly.
How do you reset your anti theft system?
Hit the reset button.
Repairing a Fussy Garbage Disposal?
A garbage disposal is a convenient tool for virtually any kitchen, and once the appliance is in use every day, it is hard to do without one. There are a few things that can cause a garbage disposal to go on the fritz and some of them can actually be fixed without calling in a professional.No NoiseIf the disposal has stopped making any noise when it has been turned on, there are some things that can be checked.1. Look under the sink, at the bottom of the garbage disposal, and try to press the unit's reset button. Sometimes it is as simple as the reset button popping out. Push it back in and give the disposal another try.2. Check the circuit breaker. If it has been tripped, switch it off and back on, then try the disposal again.3. Find the switch that powers the garbage disposal. This is usually located on the wall near the sink or in the cabinet underneath the sink. It may be a case of a malfunctioning switch. Turn off the circuit breaker the powers the disposal, then replace the faulty switch. Try the disposal once again. If this is an uncomfortable situation, it might be worth it to have a professional fix it.4. If nothing else is fixing the problem and the disposal still makes no noise when turned on, it might need to be replaced completely. A bit of do-it-yourself knowledge is required for this sort of replacement, so a professional might be needed.Strange NoisesIf the disposal unit is making odd or humming noises but will not actually run, it might be clogged or stuck on something.1. Switch the circuit breaker that powers the disposal off.2. Most garbage disposals come with an offset wrench. Insert this wrench into the flywheel turning hole - this is situated on the bottom of the garbage disposal. Going in a clockwise direction, turn the wrench. This will dislodge anything that has gotten stuck. The flywheel will turn freely when it has been cleared.3. Never put a hand down the garbage disposal. Using a wooden broom handle, the disposal's impeller can be easily unclogged or unstuck from the sink drain. Place the end of the handle against the impeller and, using a bit of elbow grease, try to free it. When it is not obstructed any longer, remove the handle and push the reset button underneath the unit.4. Turn the water on in the sink and quickly switch the disposal off and on for a few seconds. This will make the flywheel spin and can help to dislodge anything clogging it.
What causesGarbage disposal to leak from bottom through reset button?
Either the housing is cracked or the motor seal is worn or damaged. Either way, the only practical solution is to replace the disposal.
Where is the fuel pump reset button on 2001 dodge Dakota?
A Dodge Dakota does not have a reset button. The fuel system is computer controlled with relays.
