The Allison autos don't use a switch for that - it's triggered through the transmission ECU.
were is the ecu
Transmission pressure switch reverse circuit
On models with manual transmissions and transmissions such as the Eaton Autoshift, it's directly on top of the housing for the transmission tail shaft. If it has an Allison transmission, it's done through the transmission computer itself.
the reverse light switch.. aka backup light switch is located on the front of the transmission along the side screws into the transmission if standing in front of the car looking down at the transmission you can see it
The reverse lights switch on a Ford Fiesta is found on the transmission. The switch can be seen from underneath the car.
Reverse light switch is probaly connected to switch on transmission check connections
On top of the transmission output. The best way to get to them is usually to remove the boot from the transmission shift tower, and go in through the floor.If you have an Allison automatic,, the reverse lamps are controlled through the transmission ECU.
the reverse light switch is usually mounted on the shifter inside the car.
not unless you smashed the switch into the transmission. Reverse is very often the first thing to go when the transmission is going out.
Reverse lamp switch and neutral switch.
screwed into side of transmission.
Manual, top of transmission. Auto, inside the transmission.
it's on the transmission on the drivers side