The starter on most engines in most vehicles is located on the driver's side, rear of the engine, below the exhaust manifold (if there is one on that side). It will be bolted to the front of the transmission bellhousing.
The starter solenoid on a Dodge Dakota is built on the starter.
It is on the starter.
It is on/inside the starter.
The 1996 Dodge Dakota starter relay switch can be found on the firewall in the engine compartment. The starter relay switch will be on the drivers side of the firewall.
starter solenoid is connected to top of starter
The starter bolts on a 1998 Dodge Dakota require a 5/8 inch socket or wrench.
The starter solenoid is part of the starter.
the solenoid is mounted on the starter. They don't mount them on the fenderwell anymore.
You have to remove the steering intermediate shaft and remove the starter from the top.
starter located below drivers side exhast mainfold in front of transmission.
It should be located on the starter housing itself. It will be the small cylinder or bump on the side of the larger, cylindrical starter housing, and usually is what the wiring is attached to.
v8 passenger bottom side of engine.