It is on the starter.
It could be the starter solenoid
Depends what your problem is. One common problem is that the copper contacts inside the solenoid burn and pit and the starter will not kick in (or maybe just click and not do anything). There's absolutely nothing wrong with the starter motor, nor the solenoid, only the contacts inside the solenoid housing, that pass juice on to the starter motor are bad. I have sat there, miles from home, clicked the starter over and over again and prayed that on the 173rd click it will engage (which it actually does, only at its own evil pleasure). I have repaired twice in 90K miles. If above is your problem, know that you can buy a starter solenoid repair kit (with new copper contacts) from Toyota, for less $, by a country mile, than the price of a new starter. (I actually filed and polished the old contacts once before I got wise to the repair kit.) Then, it is a matter of disassembling stuff around the starter, enough to remove the starter, put it on a bench, disassemble the solenoid and replace the contacts. No rocket science, just careful, tedious work, to not break anything and get everything back together as it was. If you are not willing to let the job teach you, ask somebody else to describe the details.
it is on the driver side just beneath the exhaust manifold. you will need to remove the exhaust or the cv joint to drop the starter
it is located under the passenger side of the truck and is near the right lower control arm. It looks like a large cylynder with another smaller one attached to it. There are three bolts that hold it on, the bottom is easily accessable but the others arent as easy.
A person can get a 2004 PT Cruiser engine diagram from a Chrysler dealership. An auto parts store also may have a copy of the diagram for customers.
Yes
You pry it out.
on the transmission
4
87 octane.
There is not a fuel filter to change on a 2004 pacifica. They use the sock in the tanks for that, apparently.
where is the solenoid on a 2004 mercury sable
A ( 2004 to 2006 ) Chrysler Pacifica 3.5 litre V6 engine has a timing BELT A ( 2006 to 2008 ) Chrysler Pacifica 3.8 litre V6 engine has a timing CHAIN A ( 2007 and 2008 ) Chrysler Pacifica 4.0 litre V6 has a timing BELT
5 and a half quarts
5x127 mm
100,000 miles.
We're is the thermostat located