0
If it is a drive belt and not a serpentine belt is has no tensioner. You manually adjust the tension by normally adjusting tension by moving the alternator. Loosen to bolts holding the alternator in place and then adjust the tension. Tighten the bolts when the tension is right. If it is serpentine belt if you follow the belt around the the engine you will see the tensioner.
What else can I help you with?
How do you find the auto tension release for the serpentine belt on a solara?
how do i find the auto tension release for the serpentine belt on a 2004solara
Getting slack on Serpentine Belt 98 Chevy Malibu V6 3.1L We put in new alternator and now we're trying to get the belt back on but don't see to have enough slack. How can we get more?
Are pulleys on both the old and new alternators the same size? Did you turn the automatic belt tensioner to release tension on belt?
How do i release the tension to put my drive belt on or off 1997 dodge ram?
Google "Dodge Ram Maintenance" There are many sites listed. They have diagrams, and instructions. (This will be easier than trying to explain idler- pulleys, and alternators)
What do you need to loosen to change the serpentine belt on a 4 cylinder 1998 jeep wrangler?
u need to relaese tension on the tension pulley. this is usually done with a long socket wrench handle. when u release tension and remove belt you then release tension on pulley until you have routed new belt . you then move tension pulley again until you can put belt on it, then release pulley and it will automatically provide correct tension
How do you release the tension to install the serpentine belt on a suzuki aerio?
15 mm wrench Put it on the tension pulley and pull to take tension off belt
How do you relieve tension on serpentine belt of 97 buick park?
put a wrench on the tensioner pully and pull it to release tension on the belt
Release tension on 1991 C1500 serpentine belt?
how to release serpentine belt tensioner on 1991 C1500 Chevy Silverado?
What is a belt tension pulley?
Most cars now have a serpentine belt that drive the alternator, water pump, power steering unit, etc. The belt tension pulley is a spring loaded pulley that keeps the proper tension on all these units. It can be moved to release the tension in order to remove the belt.
How do you change the serpentine belt on a 95 sts Seville?
Release the tension with tension pulley. Follow belt pattern printed on a sticker under the hood
How do you release the tension on the serpentine belt on a 1997 Firebird Formula 5.7?
By loosening the tension on the alternator nut
How do I replace the tension belt on my exercise bike?
To replace the tension belt on your exercise bike, first, locate the tension knob and release the tension on the belt. Then, remove the side cover of the bike to access the belt. Loosen the bolts holding the belt in place and remove the old belt. Install the new belt in the same position and tighten the bolts. Finally, adjust the tension knob to the desired level and test the bike to ensure the belt is working properly.
Release the tension on the belt alternator on a 1996 Lincoln mark 8?
You have to use a 1/2 inch breaker bar and put it in the square hole of the tensioner and turn it to release the tension of the belt.
