under the housing where the lower radiator hose hooks to the engine
Changing a thermostat on a 2008 Dodge Avenger can be difficult because there area two thermostats. One is located under the intake manifold inside a housing unit, and the second is at the end of the radiator hose.
It is under the housing where the lower radiator hose hooks to engine.
It is under the housing where the lower radiator hose hooks the the engine.
If you follow the bottom hose on your radiator it will lead you to it. You will have to remove 3 bolts on the thermostat housing to get to it but it should only take you about 20 minutes to change it out.
You can find the 1991 Dodge Shadow thermostat in the thermostat housing. The thermostat housing will be on the front of the engine.
There are two. Both are under the plastic housing on the driver side end of the cylinder head.
The four cylinder has two thermostats in the housing where the upper radiator hose attaches to the engine. The v6 thermostat is under the housing where the upper radiator hose attaches to the engine also.
The dealership would be a good place to start.
beneath the radiator cap. the upper radiator hose goes to the housing with the radiator cap on it. take off that housing and the thermostat is there.
The thermostats on a Dodge Avenger 2. 4L are mounted with the plastic water housing on the driver side end of the cylinder head.
If you follow the bottom hose on your radiator it will lead you to it. You will have to remove 3 bolts on the thermostat housing to get to it but it should only take you about 20 minutes to change it out.
It is under the housing where the lower radiator hose hooks to the engine.