Don't know what kind of truck, but usually the thermostat is located where the upper radiator hose attaches to the engine. Most are right in that connection. HTH.
On my 95 pickup with 4 cylinder engine, the thermostat is located where the lower radiator hose enters the engine block. Hope this helps.
follow the top radiator hose to intake,its inside the thermostat cover,two bolts.
I have a 1997 Nissan 2wd pickup with an automatic transmission and 4 cylinder. The thermostat is located on the lower radiator hose under the power steering pump.
the library should have a shop manual for this vehicle, you can make copies of the right sections :)
Chiltons owner manual has complete eccm trouble codes
follow your top radiator belt,its inside the thermostat cover.2 bolts hold it on.
To change the thermostat on a 1994 Nissan pickup with a 4-cylinder engine, first, ensure the engine is cool and disconnect the negative battery cable. Drain the coolant from the radiator, then remove the upper radiator hose connected to the thermostat housing. Unbolt the thermostat housing, take out the old thermostat, and replace it with the new one, ensuring the correct orientation. Finally, reassemble everything, refill the coolant, and check for leaks while running the engine to temperature.
Almost all car regardless of make or model the thermostat is located where the top radiator hose meets the motor. Either in the intake or the front of the block
1-3-4-2 rotor turns clockwise.
2005 6 cylinder where is the thermostat located?
how do you connect the hyraulic master cylinder to the clutch slave cylinder on a 2000 chevy S10 pickup 2.2 4.cylinder
there is more than one freeze plug. there is about six in the block and a couple in the cylinder head(s) depending on if it is a 4 or 6 cylinder.