The Haynes manual I have says the thermostat housing is located between the lower radiator hose and the block on the left front side of the engine. The thermostat and housing are all one piece. The lower radiator hose (return) connects to the thermostat housing. follow the out hose for the rad until it enter the block it shouldn't be hard to find.
where are the fuseible links located on a 2000 ford ranger
where is the electronic relay located on a 2000 ford ranger xlt
The diagram of the thermostat location can be found in the 2000 ford ranger service manual. The manual might be available at the library, and can be bought through the local auto parts store.
is in side of the rear main fiuse box
There is supposed to be an engine thermostat . Do you mean that someone has removed the engine thermostat ? What year of Ford Ranger and what year ?
follow the top radiator hose to the engine, the thermostat is located in the housing that that end of the hose is connected to
how do you change a fuel filter and were is it located on a 2000 xlt ford ranger
follow the top radiator hose to the engine, remove it then remove the thermostat housing, remove the thermostat and replace it
can you use a transmission from a 1993 ford ranger in a 2000 ford ranger?
follow the top radiator hose to the motor the hose is clamped to the thermostat housing remove the housing and you will find your thermostat
Should be less than/around $10.00.
yes if the motors are the same.
The thermostat is done it has to be replaced.......
The 1992 Ford Ranger 4.0 liter had a 197 * Fahrenheit thermostat from the factory
On a 1995 Ford Ranger : I know on the 4.0 liter EFI engine , you follow the top radiator hose from the radiator . It connects to a metal pipe which is part of the engine cooling thermostat housing that is bolted to the front of the engine . The thermostat is inside the housing
On a 2000 Ford Ranger , 4.0 liter EFI , V6 engine : Follow the top radiator hose from the radiator , it connects to a metal pipe which is part of the engine cooling thermostat housing The engine cooling thermostat is inside the housing that is bolted to the front of the engine
where is the thermostat located on a 1989 ford tempo
on top of the thermostat housing.
Next to the thermostat housing.
Follow top radiator hose to the engine to locate the thermostat housing. The thermostat will be inside the housing.
The thermostat on a 1984 ranger is located in the lower radiator hose housing connected to the engine, not the top like most vehicles..Fairly easy to replace. Just remove the bolts.. then the housing and the thermostat.
do you have to remove fan shroud to access thermostat housing on a 1997 2.3L ford ranger
bolt pattern for 2000 ford ranger & ft pounds
Follow the upper radiator hose to the engine. It's in the housing on the engine.