0
Where should the fulcrum be placed in a first classs lever to make the ressisatance easiest to move?
Wiki User
∙ 11y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Place 4n worth of force 0.2m from the fulcrum where would you have to place 2n in order for the lever to balance?
The force is equal to the mass times your lever arm. If 4n is placed 0.2m from the fulcrum, you have 0.8 force units on you lever arm. This would imply that a mass of 2n should be placed 0.4m from the fulcrum in the opposite direction. This would give you 0.8 force units on both sides, thereby balancing the lever.
Where is the fulcrum placed on a see saw?
there is the folcrum and two wedges which are the blades the folcrom is in the middle of the scissor connectin the two blades
On what part of the microscope is the slide placed and how is it placed?
on the stage, under the stage clips .
A 4.2kg mass is placed at 3.04.0m Where can an 8.4kg mass be placed so that the moment of inertia about the z-axis is zero?
Nowhere.
What position is placed for proctoscopy?
Lateral Recumbent
Why is the fulcrum placed in the center of a teeter totter?
Thats how it is
Where should the fulcrum effort be placed to easily lift the load resistance?
As close to the load as possible. Note that the closer to the load the fulcrum is placed, the shorter the lift that can be effectuated by the use of the lever.
What would most likely happen if a fulcrum were moved to the left and placed between two empty book holders?
If the book holders are shorter than the fulcrum then it can still function are a fulcrum. If the book holders are taller than the fulcrum then it can't function as a fulcrum.
Where should the fulcrum be placed to balance a heavy load?
closer toward the load
Place 4n worth of force 0.2m from the fulcrum where would you have to place 2n in order for the lever to balance?
The force is equal to the mass times your lever arm. If 4n is placed 0.2m from the fulcrum, you have 0.8 force units on you lever arm. This would imply that a mass of 2n should be placed 0.4m from the fulcrum in the opposite direction. This would give you 0.8 force units on both sides, thereby balancing the lever.
Where would place a fulcrum of a lever if you had to lify a heavy load?
A fulcrum would be placed as close to the heavy load as possible. This minimizes the lever arm (and thus minimizes the torque) for the load while maximizing the lever arm (and thus maximizing the torque) for the force you must apply.
Where is the fulcrum placed on a see saw?
there is the folcrum and two wedges which are the blades the folcrom is in the middle of the scissor connectin the two blades
What types of candle holders are easiest to clean?
Glass candle holders are generally the easiest to clean. Unlike metal, they can be placed in the microwave for 30 seconds to soften the wax.
What are the 3 kinds of levers?
First-class levers have the fulcrum placed between the load and the effort, as in the seesaw, crowbar, and balance scale. If the two arms of the lever are of equal length, as with the balance scale, the effort must be equal to the load. If the effort arm is longer than the load arm, as in the crowbar, the effort travels farther than the load and is less than the load.Second-class levers have the load between the effort and the fulcrum. A wheelbarrow is a second-class lever. The wheel's axle is the fulcrum, the handles take the effort, and the load is placed between them. The effort always travels a greater distance and is less than the load.Third-class levers have the effort placed between the load and the fulcrum. The effort always travels a shorter distance and must be greater than the load. A hammer acts as a third-class lever when it is used to drive in a nail: the fulcrum is the wrist, the effort is applied through the hand, and the load is the resistance of the wood. Another example of a third-class lever is the human forearm: the fulcrum is the elbow, the effort is applied by the biceps muscle, and the load is in the hand.Refer to link below for more information.
Ten books are placed on one end of a lever and two books are placed on the other end To make the two books and the ten books balance the fulcrum must be placed?
One on both sides, if you put an even amount on each side, the side with less will even the other. But if your taking the Penn Foster test the answer is B. between the center and the ten books. ^_^
Are dominoes third class levers?
Dominos are not levers at all. They're just thin, rectangular solids.Although I can't imagine why you'd want to, you could make a lever froma domino, but you'd have to provide a fulcrum. If you placed the fulcrumanywhere in between the ends of the domino, then you'd have a Class-1 lever.If you placed the fulcrum at one end of the domino, then you'd have either aClass-2 or a Class-3 lever, depending on how your effort and your load werelaid out. But quite frankly, if you put a little more effort into understandinglevers, I think you'd very quickly be done with the whole squirly idea of anyrelationship between levers and dominos.
Where is a spare fuse location that works only with the ignition on for a aftermarket seat heater for a 2006 dodge sprinter?
It could be anywhere. The installer of the seat heat would have placed the fuse where ever they thought best or easiest.It could be anywhere. The installer of the seat heat would have placed the fuse where ever they thought best or easiest.
