Want this question answered?
you get a code reader and hook it up to the fuse boc and it will say erase codes and u mass the green button.
Where to hook code reader 2002 envoy
Your OBD II code reader won't work on that vehicle.
The 2009 Nissan Murano has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
There should be a plug adapter spot right under the steering wheel and dash assembly, should just plug right in... i have a 96 and i work at O'Reillys auto parts, we have a code reader that reads all nissans from 88 to current....so if is the right code reader it should just install as i said above hope that helps a little
If you are sitting in the steering wheel the hook up will be located by your right knee under the dash.
passenger side panel, above left knee
under the driver side of the dash, it is a square 6 pin connecter
you have to hook up a special reader to your computer to find out the code.
The obd2 plug is under the knee board (under the column).
The function of the hook is to get the attention of the reader.
The 2007 Nissan Murano has hook-end wiper arms on the front and a roc lock 3 wiper arm on the rear. See the Sources and Related Links section below for installation videos and correct wiper blade information. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. The rear wiper blade is difficult to find in stores - you may want to purchase online. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.