Pull the number one plug wire off and see if there is a spark from that to the engine. If there isn't then have your coil check or replaced
A non firing engine can be caused by many things. A bad crank sensor or coil pack are the first two places to check for problems.
first what make and model v12 there are a few
123456 left bank first
The MODEL A engine firing order is 1,2,4,3, which means that the front cylinder fires first,then the second cylinder,then the fourth cylinder,the last the third cylinder.
Firing order starts with the #1 cylinder which is normally the first cylinder closest to the front of the engine.
Trouble code P0731 means: Incorrect gear ratio, first gear
There's 7 different gasoline engines and 2 different diesel engine options. You need to give us the engine type first. The most common engine for that model / year is M116.965, which has a firing order of 1-5-4-8-6-3-7-2
First find out what the firing order of the engine is. Then locate the #1 spark plug. Once you find that and know the firing order and the direction the rotor turns you can easily connect the spark plug wires correctly. Ask your question again with this term. "Firing order and spark plug diagram of (list make, model, & engine size)".
The Firing order should be stamped on the intake manifold.But The Firing order is 1-3-4-2. The order of the cylindersFront of engine |1-2-3-4| Rear of engine. Good Luck and Remember.Change Your Mind, Not Your Oil.Use the First In Synthetic Motor Oil's.See My Bio For more information.
bisque firing
There numbered front to back... Engine front is closest to the radiator the first cylinder is #1 the rear cylinder is #6 The engine firing order is 1,5,3,6,2,4
the first firing range competition was in Nebraska