A volt is itself a unit.
To find your amps, divide your volt amps listed by the voltage you are using (and the device is rated for).Power in watts = Volts X AmpsVolts equals amps X resistance. All of these formulas can be transposed to find the missing element.If something is listed as 360 Volt amps and the voltage used is 120 volts it draws 3amps. So if the same device was used on a 240 volt circuit it would draw 1.5 amps. the power company charges for power (watts) so the volt amps are listed on the device and costs you the same regardless of the voltage used.If the same thing was designed for 12 volts it would draw 30 ampsThe current in amps is equal to the apparent power in volt-amps divided by the voltage in volts:A = VA / V
There in no quick and inexpensive way of doing this conversion. A transformer would have to be used and this type of winding is not common. 277 volts is the wye voltage of a three phase 480 volt system.
36-volt bulbs are easily found, try Amazon.
no volt coils are used to de-energise a contactor should a situation arise in which voltage is zero
Depends on what it is being used in.
No, the bulb would last about 5 seconds... if that.
were do i find a 9 volt magnet
The volt.The volt.The volt.The volt.
The Lanturn will gain up to 25% of its max HP.
No, the voltage span is too great. If it was connected there would be a chance the the battery would boil the electrolyte dry.
Multiply the vots by the amps to find the volt-amps. Or divide the volt-amps by the voltage to find the amps.
There is no such thing as a proton volt.
No. The capacitor will short out and possibly explode. On the other hand, the 440 Volt Cap can be used in a 220 Volt circuit.
The volt.
Yes, in fact that is what a rough service bulb is rated at. The bulb used on a 120 volt system will have a reduced wattage output as to what it would be on 130 volts.
A volt is itself a unit.