Used instead of plywood. Oriented Strand Board
Not really a good idea. The water over time from the concrete will cause the board damage. If you use a good pad there is no reason you cannot lay the carpet over concrete.
MMF can stand for lots of things. What is MMF?
They would be tags that do not have closing tags. <br> would be an example. <hr> would be another example.
PF would likely stand for plug flow.
The construction field use scales as measurements for the exact calculation of distance and deepness in every materials. The measurements are use to create a well calibrate construction who will stand the test of time.
Because OSB is porous I would use several coats of latex paint.
ahhh the all time question are you doing a complete tare off? if so 1/2 osb or 1/2 cdx (cdx is a poor grade plywood osb is orientated stand board or wood chips) osb is most economical as it is cheap and it works
OSB stands for oriented strand board. It is made of wood strands and waterproof adhesives. The strength of OSB board is equal to that of plywood.
If someone wanted to purchase an OSB there are a variety of places where someone can do so. Some of these places are Calibex, Fordaq and cheap osb and nsbe.
3/8" OSB is approximately 1.2 lbs per square foot. A typical 4'x8' sheet, then, would weigh in at slightly under 38.5 lbs.
OSB
Yes, or it will take a lot of paint due to the fact that the osb will soak it up.
gmhidrnhdenmhbswmbgsdfjibvwiosm vqeubvfjkdn yuncmksdn vync uibtqyw ajksvfweyunviwghfusidcv uerghasklcnwefhzsdlvnasduigfsdlvnsdfuighxlzn vuisdsidvnkisdbgvuisvn isdbvfhskn sdfuibvsdifobneui
I NEED THE WEIGHT OF 7/16 OSB PLYWOOD One sheet will weight 47 lbs.price
17.5kg
52
I would use epoxy if I was making a parrot stand. Those parrots can be pretty jumpy and would probably break shoddy joints on their perch.