to convert a 100mv to 1volt u will have to multiply it by 10. so u will need a stepup amplifier to do that. u can depend on am op-amp based amplifier to do it if u r allowed to use external supply, else u will need a transformer for the same.
Ashish.K
A voltage amplifier (high input and output impedances) with a gain of 83.5 dB will amplify a signal of 1 millivolt to an output of 15 volts.
Do you mean 'megavolt ampere' (MV.A) or 'millivolt ampere' (mV.A)? By using the incorrect symbol ('mva'), this is not clear.To determine the apparent power, in volt amperes, you divide the true power, in watts, by the power factor of the load. One volt ampere is one-millionth of a megavolt ampere ('MV.A' -not 'mva') -assuming you don't mean 'millivolt ampere' ('mV.A')!
It will depend on the which kind of amplifier it is ,if it is made from Op amp(Non inverting Amplifier) it will simply amplify(multiply)the signal with a factor depend on the configuration of circuit which is also known as gain of the circuit.For instance if gain is 2(dimension less) and input DC voltage is 2 Volt output would be 4 Volts. and if it an Audio or RC coupled amplifier output would be zero Hence i Wrote in the starting "It will depend on the which kind of amplifier it is"
A big difference. A transformer converts power into more useful means of transportation or matching to the end results.Pincoming = IPVP = Poutgoing = ISVS.giving the ideal transformer equationVs/VP= Ns/NP=IP/Isthen as the outgoing voltage of the transformer increase, the outgoing current will decrease. An amplifier adds power. For example, voltage amplifier add voltage (amplify) independent the amplifier current.
There is no such a thing as a thermocouple volt meter. A analogue or digital millivolt meter or volt meter is connected across a shunt or parallel with the shunt to measure the current through the resistor. Say the resistor value = 1 Ohm, then by using the Ohm law formula to calculate the current, say the voltage (voltage drop), read on the volt meter is 1.5 Volt that is R*V = A that is, 1Ω*1.5V = 1.5 Amp. Any type of DC volt meter, analogue or digital can be used to measure the voltage across a capacitor if the value of the capacitor is large enough that reading will be true RMS. as long as the supply current (EMF Power) are larger than the load current.
A milliVolt.
A millivolt (mV)
There no electrical units for measurement of volatage that are smaller than a volt. A millivolt (1/1000 volt) A microvolt (1/1000 millivolt) A nanovolt (1/1000 microvolt).
that would be 1000. milli means one thousandth of the base unit (volt) millimeter is one thousandth of a meter. milliliter is one thousandth of a liter. milligram is one thousandth of a gram
1 millivolt = 0.001 volt
No; electron-volt is a measure of energy, not of voltage (or potential).
One thousandth part of a volt. Correct Answer=0.001
IT IS 1/1000 OF A VOLT. 1000 MV EQUALS ONE VOLT.
You don't, a thermocouple's output is in the millivolt range.
so term in volt be it millivolt or petavolts it will vary on energy
A voltage amplifier (high input and output impedances) with a gain of 83.5 dB will amplify a signal of 1 millivolt to an output of 15 volts.
A millivolt is one thousandth of a volt so 0.450 millivolts would be four hundred and fifty thousands of a volt.