0
What else can I help you with?
You have two pcs. Do you need a network cable to cable to connect the tow pcs?
If you don't have at least two wireless adapters for your pcs, yes you have to have a network cable in order to connect two pcs.
For Ethenet networking crossover cords can connect two PCs directly without any intermediate network equipment?
Connecting two PCs directly using a crossover cable will enable them communicate without using any intermediate network equipment. The connection will work since a crossover cable has TX (Transmitting) and RX (Receiving) terminals that allow direct communication.
What is the name for a cable that connects a computer to another computer to create a two-node network?
The cable used to connect two computers directly to create a two-node network is called a crossover cable. Crossover cables are typically used for Ethernet connections, allowing data to be transmitted directly between the two devices without the need for a network switch or hub.
What is the type of network called that connects two computers directly together using a cross-over network cable?
If both PCs have ethernet cards, the best cable to use would be a crossover cable. A crossover cable is almost the same thing as a regular ethernet cable, except the wires inside the connector are reversed on one end. This reversing of the wires allows you to connect a crossover cable between two PCs without any other network equipment like a switch or a hub.
What is crossed cable?
crossover cable connects two devices of the same type
What is conclusion of crossover cable?
it connects two cables
What cord is needed to hook 2 computers?
If you are asking what kind of cable you need in order to directly connect two PCs using the ethernet ports, then you want what is called a crossover cable (NOT a lan cable). Go to Best Buy or a similar electronics store and tell them that, and they'll know what to give you.
What are the pinouts for a crossover cable?
A crossover cable typically uses the following pinouts for connecting two devices directly, such as two computers or switches: Pin 1 (transmit +) on one end connects to Pin 3 (receive +) on the other end, and Pin 2 (transmit -) connects to Pin 6 (receive -). Similarly, Pin 3 on one end connects to Pin 1 on the other end, and Pin 6 connects to Pin 2. This configuration allows for proper data transmission between the devices.
If you were going to connect two pcs together in a simple network using the network ports on each PC what type of cable would you use?
Crossover Cable
A technician wishes to connect two computers to move data from one to the other before reloading the operating system The NICs on both PCs do not support autosensing feature Which procedure will s?
Interconnect the two PCs with a crossover cable.
A technician wishes to connect two computers to move data from one to the other before reloading the operating system The NICs on both PCs do not support autosensing feature Which procedure will sat?
Interconnect the two PCs with a crossover cable.
What is the cable that connects two hubs?
You Use a standard port on one device, and an unlink port on the other. after that connecte the standard Cat5 cable.
