A crossover cable is necessary for two similar devices to talk to each other without the use of an intervening network connectivity device because the transmit and receive signals must be crossed between the two devices.
This is what a hub or switch would normally do. If a normal, straight through cable were to be used it would connect the transmit signal to the transmit signal on the other device, which is equivalent to two people talking to each other at the same time with no way to listen to what they are saying.
With a crossover cable the transmit signal on one end is connected to the receive signal on the other end so the two devices can talk and listen to each other.
cross over or roll over cable
Same device----> crossover cable Different device->Straight through cable
You should use the USB cable that came with the device you own. But make sure that the USB cable is the right size on both ends, because not every USB cable can fit every device.
A data cable can be used to transfer information from a device to another device, such as a cell phone or computer.
Based on the cable I have seen, the configuration of a USB 3.0 cable on the computer side is similar to any other USB1.0 or USB2.0 cable. The configuration of the USB3.0 cable on the device side is significantly different and is designed not to plug into a USB1.0 or USB2.0 device. Wikipedia has a really good write-up.
No. Just use a component cable or similar
Since its charge output is a standard USB port, you just use the charging cable that came with your device.
bridge...
Use the wire cable to connect with it if you have a USB port in your computer.
Parents can use the Parental control device to block a channel on their cable television therefore control what their kids are watching whenever they are alone by themselves. This device is control by a PIN number that parents can set on their TV and or cable set up box.
You Use a standard port on one device, and an unlink port on the other. after that connecte the standard Cat5 cable.
Hi frank - if the Galaxy tab won't hard reboot by holding the power cable, then it seems that your charging cable for the galaxy tab has gone bad. Is there another USB cable you can use to try and charge the device? If not, you may have to purchase a new cable to charge your device.
The device is called a coaxial cable.