The lowest one.
The one that has the widest diameter gear sproket.
The gear ratio for top gear is chosen to produce maximum speed, which occurs at a speed where the engine's maximum power is take up with maintaining a constant speed (on the level). For cars the overall ratio for top gear is 3.5 to 4.5 : 1. For example, if the engine's maximum power is 100 bhp at 6300 rpm, and that power can drive the car at the maximum speed of 110 mph, the overall ratio is chosen to give 6300 rpm at 110 mph.
For Automobiles its usually the 1st gear or Reverse gear.
Without more specific information, I'm going to take a guess and say it is wired backwards.
A camshaft gear is a transmission gear that transmit power.
Maximum power rating describes the maximum power at which a device can operate without reaching an excessive temperature. For example, in the case of a resistor, if its maximum power rating is exceeded, then it may burn out.
There are a lot of factors that go into determining this. What is the effective gear ratio for second gear? What is the maximum RPM of the engine? What is the rolling diameter of the tires? If you can provide the answers to those three questions, I can tell you the maximum speed.
the smaller gear makes the bigger gear a unicorn
What is the maximum legal speed when the operator's view is obstructed because of people or gear on board the vessel?
When engaged, it means that the transmission will not shift any higher than second gear. While this limits the maximum speed of the vehicle (usually to around 40 mph), it provides a boost of extra power (for instance, if you happen to be towing a trailer, or hauling a heavy load, up a steep slope).Similarly, shifting to 1 means that the car will remain in first gear, giving you maximum towing power at the expense of speed (and gas mileage).
The maximum power of a class 2 power can be between 40-50v. You should always make sure you are aware what is the maximum output for your electronics.
The problem is probably in the steering gear. Clogged passages in steering gear. Leaks in steering gear.
An Idler Gear is usually used to maintain a stable tension on a belt or chain, OR it is used to redirect the position of the belt or chain. An idler gear transmits no power to or from the belt or chain.