Heating element is the main part of the ironbox which gets heated as current passes through it. We have to use the material for heating element with features such as:
1) high melting point
2) high specific resistance
3) not easily oxidised. (most important point)
Hence the alloy NICHROME ( nickel and chromium) is used for heating element because it is not oxidised even at high temperatures.
Nicrome wire is used in a heater as a heating element.
Positive temperature coefficient heating element. Resistivity grow larger with higher temperatures so the heating element should be self regulating.
limitation of heating element
Current (Amps) = Power (Watt)/Voltage (V) Therefore a 4500W heating element will draw 18.75A = 4500W/240V
a kettle is made out of metal
"Heating" wire is used in the toaster, electric baseboard heater, blow-drier, percolator, electric space heater, and in just about any other place where electricity is used to produce heat. It's simply a wire with more resistance than 'hook-up wire'. The purpose of the wiring in typical electrical and electronic devices is simply to connect the components to each other. It's made to have as little resistance as possible, so as not to dissipate any electrical energy. But dissipation of electrical energy is the whole purpose of an appliance used to generate heat. The heating element ... comprised of heating wire ... is the main component in that circuit. The heating wire has some resistance ... enough to avoid a "short circuit" that would trip the circuit breaker and possibly melt the house wiring, but little enough so that it draws a large current and gets glowing-red hot when connected across the mains supply. Typically, a fan blows air across the heating wire, to pick up the heat and distribute it into the room or the wet hair.
The materials in a immerisian heater are used for making the heating element heat in water. Without them they couldn't be a chance for the heat to last.
An immersion electric heater usually uses nichrome wire as the heating element. Nichrome is highly resistive, and by applying a voltage, we can get it pretty hot. Nichrome is used as the heating element in toasters and on electric range elements as well as lots of other places.
Aga ? will this do? Edit: No idea what Aga is. Resistive element. Heating element. Heater. Burner. Do you care to specify the appliance?
The heating element is probably broken
The heating element of an electric heater is a "resistor", the cord which conducts the electricity is not. The resistance of the element of an electric heater is very high. As current flows through the heating element, it becomes red hot and glows. On the other hand, the resistance of the cord is low. It does not become red hot when current flows through it.
A convection heater works on the principle of air convection currents circulating through its body and across its heating element. Heating element heats up the air, causing it to increase in volume and become buoyant. A convection heater can have an electrical heater element, a hot water coil, or a steam coil.
Lower heating element goes out.
with a submersion heater designed for bath tubs..
If you are sure it is the heating element it is a serviceable item. The seat can be removed and the seat cushion can be disassembled to remove the heating element. Follow the wire into the seat to find the element.
Because metals are good heat conductors !
It doesn't, allthough the resistive value is dependant on heater temperature the resistance of the sensor changes due to the presence of certain gasses (methane in this case) while the heater element itself facilitates a catalystic reaction in the sensor element. The temperature of the heating element is self-regulated and dependant on heater voltage.
In an electrical space heater, electrical current dissipates energy into heat, and the heat radiates from the element. In a fuel powered space heater, an orifice throttles the fuel feed (resistance to flow), which controls the heating rate. In a steam powered space heater, an orifice throttles the steam (resistance to flow), which controls the heating rate.