0
Small cylinders of liquids are placed in a disk, with their length in the plane of the disk. When the disk is spun at high revolutions per minute, a high centripetal force, equivalent to several gravities is generated along the length of the tube, thus settling out any heavier portions of the contents.
In practice, the tube is inclined to the spin axis, to aid the sediment to flow down the surface of the tube.
Wiki User
∙ 11y ago
Wiki User
∙ 14y agoWhich instrument uses differences in densities to separate the parts of a mixture by spinning?
- a crucible
- a centrifuge
- an accelerator
- a wheel
Wiki User
∙ 9y agoA centrifuge is used to spin liquids to separate components.
Roderick Manuel Laba...
Wiki User
∙ 12y agoI believe the answer you're looking for is centrifuge. Hope that helps.
Wiki User
∙ 9y agoCentrifuge is used to spin liquids to separate components.
Wiki User
∙ 10y agoA centrifuge is an instrument that is used to spin liquids into seperate components. The centrifuge can take the plasma and other cells out of a sample of blood.
Wiki User
∙ 14y agocentrifuge :)
Wiki User
∙ 10y agoIt is called a Centrifuge.
Jamar Johnson
A crucible
Add your answer:
Earn +20 pts
The science spin features come from what magazine?
Spin science features come from discovery magazine.
Details about different methods of separation of components of a mixture?
Fitrate.Decantation-Decantation is a very quick method for separating a mixture of a liquid and a heavier solid.Filtration-This is a method which is the most especially effective for separating suspensions, for example mud in water. We pour the mixture into a funnel fitted with a piece of filter paper. There are tiny holes in the filter paper for the liquid to pass through, the solid particles are too large to do so, therefore the solid particles will stay on the paper as what we called a solid residue. We called the liquid which pass through the FILTRATE.Centrifugation-Centrifugation is used when we want to separate small amounts of suspension. The suspension of solid in liquid is poured into a centrifuge tube, then spin around very fast in a centrifuge. The spinning motion forces the solid to the bottom of the tube. Then the liquid can be poured off from the solid.Evaporation-We cannot separate a mixture which is a solution using filtration or centrifugation. Since it is spread all through the solvent in tiny particles. The solution is heated so that the solvent evaporates, and just leave the solid behind.Crystallization -It is a process of forming crystals. It is also a method for separating dissolved solids from a solution.Distillation -When a solution of solid in liquid is heated, the liquid will evaporates. The hot vapor that formed can de condensed back to liquid again on a cold surface. We called this method DISTILLATION. Distillation is used for separating a solvent from a solution. We called the liquid collected a distillate.Separating Funnel -Immiscible liquids,such as oil and water can be separated by using a separating funnel. The mixture is put into a separating funnel, shaken and allowed to settle. The oil and water from two separate layer. The liquid with higher density, in this case water forms the lower layer. Remove the stopper and open the tap after standing. The water runs out through the tap. The oil remains in the funnel and can be run out into another beaker.Fractional Distillation -Miscible liquids are much more difficult to separate. Mixtures of miscible liquids can be separated by fractional distillation. It will provide the boiling points of the liquids are not too close.Sublimation -Some solids can change to vapor state without melting when heated. We called it SUBLIMATION. When the vapor is cooled, the solid forms again. We often use sublimation to separate a mixture of two solids in which one sublimes, but the other does not. For example, iodine from a mixture of sand and iodine by sublimation. When heated, only iodine changes to vapor. The vapor changes back to solid on the side of the funnel.
What is causing the washing macine agitator to run when it is in the spin cycle?
When you washing machine is in the spin cycle the agitator should rotate along with the drum of your washing machine and that's normal. There is no way it could be going up and down and will only appear that is is agitating while on spin.
What is a rod that can spin and move?
An axle , the drive-shaft ,
How do you change light bulb in globe?
Spin it on its axis
What instrument is used to spin liquids to separate components.?
A centrifuge is used to spin liquids to separate components.
What instrument is used to spin liquids to separates components?
A centrifuge is used to spin liquids to separate components.
What instrument is used to spins liquid to separate components?
A centrifuge is used to spin liquids to separate components.
What instrumental is used to spin liquids to separate components?
A centrifuge is used to spin liquids to separate components.
What instruments used to spin liquids to separate components?
A centrifuge is used to spin liquids to separate components.
What instrument is being used to spin liquids to separate components?
We know that a centrifuge is used for this purpose.
Spin liquids to separate components?
centrifuge
What instrument is used to spin liquids to sparate components?
Cenrifuge
What instruments is used to spin liquids to separated compounds?
A centrifuge is used to spin liquids into separate components.
What instrument is used tp spin liquids to separate componets?
centrifuge
What instrament is used to spin liquids to sparate components?
This is a centrifuge, based on separation of more dense matter based on centrifugal force.
How do biologists isolate cell components?
The instrument used to fractionate cells is the centrifuge, which can spin test tubes holding mixtures of disrupted cells at various speeds. The resulting force separates the cell components by sixe and density.
