I have a gunite that I absolutely love, 10 years old. No problems, I drain and clean every two years, still looks awesome. No cracks, chips or stains. Just give it a little TLC and the pool will last a long time.
Mother_In_Law has a inground vinyl pool - 20 years old - she has had to replace the liner 4 times and will be doing it again very soon due to major rinkles at the drop off spot.
I have a fiberglass pool. 12 years old, never had to drain for cleaning, never had to change a liner and looks like the day it was put in the ground and should for another 20 years. Cost a little more up front but if you ask the others what their added cost for the cleanings and liner changes,plus just having to do it, cost over the same years, I'll bet my fiberglass pool against your pool, I'm way ahead on overall maitenance cost. And no down time.
you will find that people will swear by either method and then others will say in ground gunite or concrete is best . If properly maintained they are all much of a muchness. from what I have seen When they are new the vinyl pool looks better. the problem is that the vinyl will need to be replaced eventualy while you wont have this problem with fiberglass.
there is a company that has a dealer base across the country called Fiber Tech. You will have to have a concrete floor but other than that they line your pool with fiberglass and special resins giving you a product with a 25 year warranty. They are located in Largo FL.
No. They should perform equally well in any state that has similar weather conditions.
It would depend on what kind of an in-ground pool you refer to, i.e. gunite, concrete, block, vinyl liner, wood, or fiberglass.
If it was working ok before you lined it and you have no problems removing the liner you should have no problems.
Hum, not sure if you can actually plaster a fiberglass pool. The glass would have to be removed first. You will have to consult a pool builder, a company that installs fiberglass shells or a company that installs fiberglass in plastered pools - thus converting a gunite/plaster pool into a gunite/fiberglass pool. The later uses the old pool shell as the sub-grade or foundation so to speak. k
Yes, fiberglass pools have a smooth finish. Where a concrete pool was a pourus and rougher finish that gives alge something to grab on to. Also staining it. A low calcium level can pit a concrete pool, not a fiberglass, plus a fiberglass pool is more flexible,so ground movement wont crack it. In the long run the extra money you pay for fiberglass is worth it.
I doubt it, Gunite is normally used in swimming pool structures and it could very well look like asphalt
Yes but its not recommended. You would have to replace the liner very soon. I have a customer who spent almost 60 grand on a pool were the liner was placed over concrete and now 4 years later she is spending almost 6 grand to replace the liner and redo the pool with vermiculite. Best bet is to refinish the pool with either gunite or vermiculite pool crete and then put in the liner. A liner can last ten to fifteen years before having to be replaced and then when it is replaced, it looks like a brand new pool.
Pebble sheen is the finish on the surface of a pool gunite is the cement that a pool is constructed from in other words you can finish a gunite pool with pebble sheen.
The experts at Advanced Pool Coatings have been installing fiberglass coatings over vinyl liner pools for over 30 years. You can read more at: http://www.advancedpoolcoatings.com.
Advantages of Fiberglass Pools: Quick Installation: Fiberglass pools can be installed in just a few days, while gunite pools often take several weeks to complete. Smooth Surface: The gel coat finish of fiberglass pools is smooth and comfortable to the touch, making it easier on the skin and less likely to harbor algae. Low Maintenance: Fiberglass pools require less maintenance due to their non-porous surface, which means they resist algae growth and need fewer chemicals to keep the water balanced. Durability: Fiberglass is strong and can withstand ground movement, making it less likely to crack compared to gunite. Energy Efficient: Fiberglass pools retain heat better than gunite pools, which can lead to lower heating costs. Less Water Usage: Because they are less porous, fiberglass pools typically require less water for maintenance and filling. Advantages of Gunite Pools: Customization: Gunite pools can be custom-designed in any shape or size, allowing for unique features and aesthetics that fit your backyard perfectly. Strength: Gunite pools are built with concrete and rebar, making them very strong and durable over time. Longevity: With proper maintenance, gunite pools can last for decades, often outlasting fiberglass pools. Wide Range of Finishes: Gunite pools offer a variety of finishing options, such as plaster, tile, and pebble, allowing for personal style. Deep-End Options: Gunite pools can be built deeper than fiberglass pools, which is ideal for diving or other water activities. Conclusion: Ultimately, the choice between a fiberglass pool and a gunite pool depends on your personal preferences, budget, and backyard space. Fiberglass pools are great for quick installation and low maintenance, while gunite pools offer more customization and longevity. Each type has its own set of benefits, so consider what matters most for your outdoor space! pools-now. com