answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: Which is more efficient between series and shunt regulator and why?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the difference between shunt and series regulator?

Basic voltage regulators are classified as either SERIES or SHUNT, depending on the location or position of the regulating element(s) in relation to the circuit load resistance.


What are the advantages and disadvantages of a shunt regulator?

advantages and dis advantages of shunt regulator


What do you mean by series voltage regulator vs shunt voltage regulator?

wala... secret In general the difference between series and shunt (or parallel) is that series is like a string of pearls, each one receives from a leading source and sends directly to a draining target (the current has to flow equally through all). Parallel however is like a railroad track in that the source is one rail and the drain is the other rail with each of the ties pulling from one and pushing into the other regardless of what any of the other "ties" are doing (each has a completely separate current flow from the others). In terms of regulation a series regulator would have to "block" some of the power going through it to the load in order to regulate it. A shunt or parallel regulator would have to "drop" or waste enough of the limited available power to restrict what would be left available to the load (or loads). Hope this overview helps


Which has a highest resistance between shunt resistor and series resistor?

If you are placing more than one resistors in series, then its combined resistance is higher than when you place these resistors in shunt.


What are the basic types of facts controllers?

series controller, shunt controller,series-shunt controller,series-series controller


What is shunt source?

The circuit is designed so that at maximum load current the shunt regulator draws virtually no current and at minimum load current, the shunt voltage regulator passes the full current. As a result, it can be seen that shunt regulators are inefficient because maximum current is drawn from the source regardless of the load current, i.e. even when there is no load current.


What are the differences of Long shunt vs short shunt generator?

In long shunt the shunt field winding is in parallel to both generator and series field. In short shunt the shunt field is in parallel to generator only.


Difference between amplifier and feedback amplifier?

An ordinary amplifier can have high gain but is unstable, drifts, can oscillate, etc. An amplifier with negative feedback has lower gain but is stable, does not drift, won't oscillate, etc.


Capacitors block......... frequencies filling the blank?

It depends on whether the capacitor is series or shunt. If series, capacitors block low frequencies. If shunt, capacitors block high frequencies.


Does series field winding have more resistance or a shunt field winding?

shunt field winding have more resistance than series field winding ************sai ganesh ************269*******


How do we adjust the voltage of a shunt generator?

The voltage is adjusted with a potentiometer that adjusts the field voltage through the voltage regulator.


Which is a shunt that exists between the pulmonary and aortic trunks in the fetus?

The ductus arteriosus is a shunt between the pulmonary and aortic trunks in the fetus. This shunt normally is closed at birth.