Win 98 is newer than win 3.1
Win98
I'm assuming that you have XP installed and you want to run Win98. Put a dos boot disk in your floppy drive and boot to dos. Run win98 setup (if you can't run it off a CD then copy it to a new folder on your hard drive and repeat the previous step. Install Win98 to its own new unique named folder, different from /windows. After setup is complete reboot and continue into xp. In xp right click on my computer/properties/advanced/startup and recovery settings, then check mark 'time to display list of operating systems'. When you reboot this time you will be presented with an option to run either XP or 98. You cannot install Win98 to an NTSF hard drive partition afaik.
Yes, but only if your motherboard supports the ability to boot to alternate IDE devices\drives. If your WinXP system does support this then you will need to temporarily install the hard disk from the old Win98 system as the primary master and install your Win98 OS on it. The installation of Win98 on the hard disk drive will not work in your system running XP. Win98 Plug and Play is more Plug and Pray, so don't bother trying. Backup you data first because install the win98 OS probably will remove all your data. Remember to remove the XP hard disk so you don't install win98 over it. Once you are done with the install of Win98 you will need to re-install the Winxp drive as the primary master and configure the win98 hard disk as secondary master. Your BIOS setup should allow you to select what drive to boot with. Good Luck!!!
Win98,win2000,and winXP support IEEE 1394.
Google it,download it. Or maybe you just need to change it's 'skin'. [You download it also].
Update Win98 from the Microsoft website that should help.
newer
Depends on your version of Windows. The 9X series, you need to create a bootdisk, one with CD-ROM drivers, or in 2000 or XP, you can select the F8 key.AnswerJust Arrange a Bootable CD ormake a bootable floppy disk from control panel> Add Remove> Start Up> Creat a disk (Button)where a clean formatted floppy disk must be inserted into floppy drive.orIf you have got win98 backup in your d: or other drive you may format and install your windows without booting your system.see how1- Restart your system2- During Restarting Hold F8 or Ctrl Key for some secondsyour system will jump to post screenFrom here you can go to safemode or command prompt only or Safemode with command prompt only3 - Go to any command prompt to work with dos commands4 - Get into win98 folder say if win98 is backed up in d: drive thentype d: "enter" CD win98 "enter"format c: "enter"ThanksFormat command will work under win98 directory
dirtier, dirtiest newer, newest
the E63 is newer, after this is the E55.
Renew
newer are better